Sony CFS 717S User Manual

On placement/operation  
Pre ca u t io n s  
WARNING  
• Do not leave the player in a location  
near heat sources, or in a place subject  
to direct sunlight, excessive dust or  
mechanical shock.  
Ad ju st in g t h e a u d io e m p h a sis  
(DYNAMIC SOUND SYSTEM)  
Se t t in g u p t h e syst e m  
Co n n e ct in g t h e Sp e a ke rs  
On safety/pow er sources  
To prevent fire or shock hazard, do not  
expose the player to rain or moisture.  
To avoid electrical shock, do not open  
the cabinet. Refer servicing to qualified  
personnel only.  
• Should any solid object or liquid fall  
into the player, unplug the player, and  
have it checked by qualified personnel  
before operating it any further.  
• For AC operation, check that the  
players operating voltage is identical  
with your local power supply (see  
“Specifications”) and use the supplied  
mains lead; do not use any other type.  
The voltage selector is located on the  
rear of the player .  
• The player is not disconnected from the  
AC power source (mains) as long as it is  
connected to the wall outlet, even if the  
player itself has been turned off.  
• For battery operation, use eight R20  
(size D) batteries.  
• Do not place anything within 10 mm of  
the side of the cabinet. The ventilation  
holes must be unobstructed for the  
player to operate properly and to  
prolong the life of its components.  
• Since a strong magnet is used for the  
speakers, keep personal credit cards  
using magnetic coding or spring-  
wound watches away from the player  
to prevent possible damage from the  
magnet.  
Using the 5 BAND GRAPHIC EQUALIZER  
Make sure you turn off the power before making connections.  
Use  
To adjust  
b
Ra d io  
BALANCE  
MEGA BASS  
400 Hz  
Stereo imaging.  
Deep bass sound.  
Do not install the appliance in a  
confined space, such as a  
bookcase or built-in cabinet.  
a
1
Ca sse t t e -  
Co rd e r  
Speaking voice, middle frequencies of  
instrumental music.  
The FUNCTION selector is  
located at the front.  
When you turn on the player, the  
OPR/ BATT indicator lights up.  
• If the player has not been used for a  
long time, set it in the playback mode to  
warm it up for a few minutes before  
inserting a cassette.  
1 kHz  
4 kHz  
10 kHz  
Presence of vocals.  
Brightness of the sound.  
2
]
L
}
}
R
]
• When the batteries are not to be used,  
remove them to avoid damage that can  
be caused by battery leakage or  
corrosion.  
Operating Instructions  
High treble sounds or to reduce high  
frequency noise/ tape hiss.  
If you have questions or problems  
concerning your player, please consult  
your nearest Sony dealer.  
K
A
E
P
S
Using the PRESET MODE  
• The nameplate indicating operating  
voltage, power consumption, etc. is  
located at the rear.  
Use  
To  
1
2
Align the grooves and slide the speaker box down until it  
snaps into place a.  
MANUAL  
Adjust the sound using the 5 BAND  
GRAPHIC EQUALIZER.  
DISCO  
PARTY  
Get powerful, clear sounds emphasizing low  
and high range audio.  
Connect the black wires to (–) minus and the red wires to  
(+) plus terminals: the right speaker wires to the R, and  
the left speaker wires to the L terminals.  
Get light, bright sounds emphasizing high  
and middle range audio.  
Tip  
LIVE  
Get wide-ranging sounds having presence.  
To detach the speakers, unlock the speaker b and slide the speaker box all  
the way up and away from the player.  
No t e  
CFS-717S  
When adjusting the 5 BAND GRAPHIC EQUALIZER, be sure to set the PRESET  
MODE to MANUAL. The graphic equalizer will not work in any other position.  
CFS-717SMK2  
Ch o o sin g Po w e r So u rce s  
Co n n e ct in g o p t io n a l  
co m p o n e n t s  
To u se t h e p la ye r o n AC p o w e r so u rce (m a in s)  
©1997 by Sony Corporation  
Connect the supplied AC power cord to the AC IN jack.  
Before making connections, be sure to turn off the power of the  
component and set FUNCTION to TAPE/ RADIO OFF on the player.  
3-859-353-15(1)  
List e n in g t o Au d io Co m p o n e n t s  
Tro u b le sh o o t in g  
Sp e cifica t io n s  
Deck A  
Frequency range  
Battery life  
Th e re is n o a u d io .  
FM: Saudi Arabia: 87.6–107MHz/ Central  
and eastern Europe: 65–108MHz/ Other  
countries: 87.6–108MHz  
MW: 530–1,605kHz  
SW1: 2.3–7MHz  
SW2: 7–22MHz  
FM Recording: Sony R20P: Approx. 5  
hours/ Sony LR20 alkaline: Approx. 12  
hours  
Playback: Sony R20P: Approx. 2 hours/  
Sony LR20 alkaline: Approx. 5.5 hours  
Pow er requirements  
110–120V/ 220–240 V AC selectable, 50/  
60Hz  
• Connect the mains lead securely.  
• Insert the batteries properly.  
• Replace all batteries if they are weak.  
• Unplug the headphones.  
• Adjust the volume.  
• Set FUNCTION to the position you  
want to operate.  
to CD/TV LINE IN  
Capstan  
Capstan  
1
to AC IN  
L (w hite)  
CD/TV LINE IN  
Audio connecting cord  
RK-C520HG (not supplied)  
L
IF  
2
to a wall outlet  
R
FM: 10.7MHz MW/ SW: 455kHz  
Aerials  
FM/ SW: Telescope MW: Built-in ferrite  
bar  
12V DC, eight R20 (size D) batteries  
Pow er consumption  
AC 30W  
R (red)  
Ca sse t t e ca n n o t b e in se rt e d .  
• Insert the cassette properly.  
To u se t h e p la ye r o n b a t t e rie s  
Insert eight R20 (size D) batteries (not supplied) into the battery  
compartment.  
• Dimensions  
Recording system  
Playback  
head  
Th e r REC b u t t o n d o e s n o t  
fu n ct io n .  
No cassette is in deck B.  
• Make sure the safety tab on the cassette  
is in place.  
Approx.760 x 225 x 220mm (w/ h/ d) (30  
x 8 7/ x 8 3/ inches) incl. projecting  
parts 8and co4ntrols, not incl. handle  
• Mass  
Approx. 6.8kg (15 lb) incl. batteries  
• Supplied accessory  
4-track, 2-channel stereo  
Frequency response  
80–12,500Hz  
Speakers  
Full range: 10cm (4 inches) dia. , cone  
type/ Tweeter: 5 cm  
(2 inches) dia.  
Input  
MIX MIC jack (minijack), sensitivity 3.9  
mV for low impedance microphone CD/  
TV LINE IN jacks (phono jacks),  
sensitivity  
Pinch  
roller  
Pinch  
roller  
To a d ju st t h e vo lt a g e  
110  
ı
220  
ı
Be sure to set the VOLTAGE  
SELECTOR(at the rear) to  
your local power supply.  
120V  
240V  
After connecting the component, set FUNCTION to CD/ TV LINE IN and  
play the connected component.  
AC power cord (1)  
Po o r p la yb a ck, re co rd in g o r  
e ra sin g q u a lit y.  
• Dirty heads. Clean the unit (as shown)  
with a cotton swab slightly moistened  
with cleaning fluid or alcohol.  
• Demagnetize the heads and all metal  
parts in the tape path with a  
Tip  
Design and specifications are subject to  
change without notice.  
VOLTAGE SELECTOR  
You can record the sound of the connected component. Insert a cassette, and  
press r REC on deck B.  
No t e  
0.43 V, input impedance 50 kilohms  
Output  
Tip  
MIX MIC  
Connect the cables firmly to avoid  
For customers supplied with an AC plug adaptor, use it if the plug of the  
mains lead does not match your mains.  
Headphones jack (stereo minijack), for  
16–68 ohms impedance headphones  
Maximum Pow er output  
12W + 12W  
Erase head  
commercially available tape head  
demagnetizer.  
any malfunction.  
Capstan  
No t e s  
Usin g t h e Micro p h o n e  
• To use the player on batteries, disconnect the mains lead from the player.  
Turn on the microphone (not supplied)  
• Replace the batteries when the OPR/ BATT indicator dims or when the  
player stops operating. Replace all batteries with new ones.  
if it has a power switch.  
Tip s  
Record/  
Playback head  
Pinch roller  
Cotton sw ab  
• To mix radio or tape sounds and your voice, play the sound you want, and  
speak or sing into the microphone.  
• To use the player as a public address system, set FUNCTION to  
CD/ TV LINE IN, and speak into the microphone.  
No t e  
Deck B  
If acoustic feedback (howling) occurs, turn down the volume or move the  
microphone away from the speakers.  

Weil McLain STAR 34 User Manual
Univex G1158 User Manual
Toshiba Blu Ray Player BDX3300 User Manual
Tektronix Camcorder 1780 R User Manual
Technics SB A386 User Manual
Sony DSR 300 User Manual
Sony Car Stereo System CDX GT550 User Manual
Sony Camera Accessories DCR SC100 User Manual
SimpleTech Digital Camera Memory Card User Manual
Sharp 10P01 CH NG User Manual