Zanussi Washer TL 555 C User Manual

ZANUSSI  
WASHING MACHINE  
TL 555 C  
INSTRUCTIONS MANUAL  
129 6774 05  
 
SAFETY INSTRUCTIONS  
You must read the whole of this instruction book  
Small and delicate objects (e.g. baby socks,  
stockings) can be easily washed inside a small  
pillowcase with a zip fastener or in larger  
socks.  
before you use the appliance. Follow the advice  
carefully. Keep the book for future reference. If  
you sell or give away the appliance, make sure  
that the book is passed to the new owner.  
Thefollowingwarningsareprovidedintheinterest  
of overall safety. You must read them before the  
appliance is installed or used.  
Use only the recommended quantities of fabric  
conditioner.  
Beforecleaning,careandmaintenance,ensure  
that the machine is unplugged.  
Use  
This appliance is designed to be used by  
adults. Children should not be allowed to touch  
the controls or play with the product.  
Installation  
It is dangerous to modify the specifications of  
this appliance in any way.  
Any electrical work required to install this  
appliance should be carried out by a qualified  
electrician or competent person.  
Always unplug the appliance and turn off the  
water after use.  
Any plumbing work required to install this  
appliance should be carried out by a qualified  
plumber or competent person.  
Only wash fabrics with are designed to be  
machine washed. If in doubt, follow the instruc-  
tions you find on the label of the item itself.  
Make sure that the appliance does not stand  
on its electrical supply cable.  
Place small metal rings or edged plastic rings  
in a net or bag.  
This appliance is heavy. Care should be taken  
when moving it.  
Make sure that all pockets are empty. Hard,  
sharp objects such as coins, safety pins, nails,  
screwsorstonescancauseextensivedamage.  
Allpackagingandtransitboltsmustberemoved  
before the appliance is used. Serious damage  
may occur if this is not done.  
Do not machine wash fabrics which are  
saturated with petroleum products. If volatile  
cleaning fluids have been used, make sure  
that they are thoroughly removed from the  
fabrics before they are placed in the appliance.  
If your washing machine is in a room subject to  
temperatures below freezing, the water must  
be removed from the machine. So, the  
danger of freezing should be expected.  
Read all instructions before using  
the appliance and save them for  
future reference.  
3
 
When disposing of the machine in a proper  
manner, destroy the door lock and cut off the  
power supply cord.  
Safeties  
Lid : your washing machine is equipped with  
asafety avoidingtheswitching oftheappliance  
when the flapdoors of the drum are opened ;  
the closure of the lid is so impossible. An  
electromechanic safety prohibits the opening  
of the lid when the washing machine works and  
2 minutes after the end of the programme.  
Washing motor : in case of mechanic  
overloading, overvoltage, a thermic safety  
protects automatically the motor.  
Heating : the heating can only begin when  
the water quantity necessary for the washing  
is in the tub. This safety is useful when there is  
a water break-up or if you forget to open the  
water inlet hose.  
Environmental information  
All materials marked by the symbol  
are  
biodegradable. They can be disposed of without  
danger or burnt in rubbish incinerators.  
In order to realize water and energy savings and  
to act in an environmentally conscious manner,  
we advice to follow the below instructions :  
- use if possible the appliance with full loads  
instead of partial loads. Take care to do not  
overload the drum.  
- Use only the programmes with prewash for very  
soiled laundry.  
- Savings on detergent and for the environment  
may also be achieved if with medium to hard  
water you add sufficient detergent for soft water  
andthenaddseparatelyasoftener.Thisrelieves  
our waters of a certain amount of chemicals.  
4
 
DESCRIPTION OFTHE APPLIANCE  
Timer  
Control panel  
Pushbuttons  
Lid  
Handleforopeninglid  
Lever for castors  
Trap door for lint filter  
Detergent dispenser  
Symbols  
1
2
( ) Washing powder or liquid detergent for  
programmes with pre-wash (1).  
( ) Washing powder or liquid detergent for  
the main wash (2).  
4
3
( ) Bleach compartment (3).  
( ) Liquid additives (fabric softener and  
conditioner...) (4).  
($) Liquid detergent.  
5
 
USE OFYOUR APPLIANCE  
The control panel  
Never turn the programme selector when the appliance is working.  
TL 555 C  
1 2  
3 4  
5
5 Programme selector  
1 ON/OFF pushbutton " "  
It enables to select the most adapted programme  
to the nature and degreees of soil of your laundry.  
Turn the programme selector clockwise to select  
the chosen programme.  
The programme selector indicates each pro-  
gramme phase as it takes place.  
At the end of the programme, the appliance stops  
automatically on a position off "I" or on a position  
rinse hold " ".  
Press the ON/OFF pushbutton, the programme  
starts : the control lamp lights on.  
2 Control lamp  
The control lamp lights on when the appliance is  
working (on/off pushbutton " " pressed). It lights  
off when the on/off pushbutton " " is pressed out.  
3 Cold pushbutton " "  
This pushbutton allows to wash laundry with cold  
water on all programmes. The water coming into  
Never turn the programme selector  
anticlockwise.  
the tub is not heated.  
4 Energy saving pushbutton " "  
This pushbutton enables to save a lot of energy  
by limiting the water temperature to 60°C. The  
other characteristics of the programme remain  
unchanged.  
6
 
OPERATING INSTRUCTIONS  
1. Place the laundry in the drum  
lift up the lid of the machine.  
open the drum with your two hands by pressing  
the button A and the two flapdoors till they  
disengage.  
introduce the laundry into the drum ; close the  
drum and the lid of the machine.  
Be careful : before closing the lid of your ma-  
chine, make sure that the drum flapdoors are  
correctly closed :  
A
the two flapdoors fastened,  
the button A pressed out.  
2. Measure out the detergent  
Measure out the amount of detergent  
recommended by the manufacturer in the main  
wash compartment ( ).  
If you wish to carry out a prewash, pour the  
amount required into the prewash compartment  
( ).  
Do not exceed the MAX level.  
3. Add the bleach agent, if required  
You may use a bleach agent in all the washing  
programmes. However, make sure that the fabric  
withstands the treatment. Bleach is automatically  
washed down into the drum. Pour 1/4 to 1 glass  
of 12° chl bleach into compartment marked ( )  
before switching the machine on.  
Make sure that the level of the liquid never  
exceeds the MAX level.  
4. Add the fabric softener  
Pourthesoftener,ifrequired,intothecompartment  
marked ( ). Do not exceed the MAX level.  
5. Press the energy saving  
pushbutton " " or the cold  
pushbutton " " if required.  
7
 
6. Select the programme  
Choose the programme according to the nature  
and the degree of soil of the laundry.  
Turn the programme selector clockwise to select  
the chosen programme.  
7. Starting of the programme  
The ON/OFF pushbutton " " enables to switch  
on your machine. The control lamp lights on and  
the programme begins.  
8. At the end of the programme  
When the selected programme is over, the ma-  
chine stops automatically. The timer knob stops  
on the position "I" for the cotton programmes. The  
synthetic, delicates and wool programmes end by  
a rinse hold " ". You can finish these program-  
mes by a spinning (programme 6) or a draining  
(programme 12). Depress the on/off pushbutton  
"
" before doing your choice.  
After each wash, depress the on/off pushbutton.  
Press off the pushbuttons if necessary ; unplug  
the machine from the wall socket ; turn off the  
water tap.  
8
 
PROGRAMMES CHART  
Programmes for cotton/linen and for synthetics/delicates/wool  
Maximum loads : 5 kg (cotton),2,5 kg (synthetics), 1 kg (wool).  
Programmes  
description  
Temperatures Detergent  
Water  
Time  
(°C)  
dispensers  
to use  
consumption in minutes  
in liters  
White +  
90  
90  
60  
60  
40  
90  
79  
79  
79  
79  
60  
0
150  
135  
135  
105  
90  
50  
5
1
2
White  
*
White +  
2
3
White  
Short programme  
Rinsing  
4
5
6
7
*
Spinning  
Synthetics +  
Synthetics  
Delicate  
Wool  
60  
60  
40  
30  
72  
58  
58  
63  
42  
0
85  
75  
55  
45  
20  
5
8
9
10  
11  
12  
Rinsing  
Drain  
(*) If the laundry can withstand the bleaching treatment.  
When the selected programme is over, the washing machine stops automatically. The timer knob stops  
on the position "I" after a spinning phase (for the cotton and linen programmes) or on the position rinse  
hold (for the synthetics and wool programmes). You can end these programmes with a spinning (by  
setting the timer on the programme 6) or with a draining (by setting the timer on the programme 12).  
Please depress the ON/OFF pushbutton before doing your choice.  
BE CAREFUL :  
THE LID CAN ONLY BE OPENED 90 SECONDS AFTER THE MACHINE HAS STOPPED.  
9
 
HINTS ANDTIPS  
temperature should not exceed 40°C.  
Washing hints  
Resistant white and coloured synthetics can  
normally be washed at 60°C but also in this case  
40°C is sufficient if the laundry is not excessively  
dirty.  
Delicate synthetics, synthetics with non-fast  
colours and woollen garments must never be  
washed above 40°C.  
As you already know, your washing machine can  
also wash with cold water. However, it must be  
remembered that the detergents currently on the  
market have not been designed for cold washes  
and that in winter, when the water is very cold,  
they may not dissolve adequately.  
You are advised not to leave your laundry too  
long, especially when damp. Damp laundry  
produces moult and unpleasant smells.  
Moult stains cannot be removed.  
Sort your laundry.  
Study carefully the chart in this booklet explaining  
the symbols used on clothes labels (see page  
13).  
The following points are particularly important :  
- a line under the bowl means that the garment  
cannotbewashedusingprogrammesforresistant  
fabrics such as cotton and linen;  
- do not mix coloured garments with whites;  
- anticrease materials like polyester/cotton should  
be treated as synthetics;  
- non-resistant fabrics like acrylic and most curtain  
materials should be treated as delicate fabrics;  
- the wool programme is designed specifically for  
pure new wool. Other types of wool and wool  
mixtures may shrink or felt if machine-washed.  
Woollen garments should be spun briefly  
immediately after washing.  
We suggest the use of liquid detergents.  
How much laundry can be washed in  
one load?  
Strictly speaking you should always weigh your  
laundry.  
The drum will take a maximum of 5 kg of cotton  
and linen. For synthetics and delicate fabrics, the  
maximum load is 2,5 kg and for wool, 1 kg.  
As weighing can be complicated, we suggest you  
estimate the weight according to how full the  
drum is:  
Prewash  
Prewash is not normally necessary. Your new  
washing machine combined with modern  
detergentswillgiveperfectwashingresultswithout  
prewash, thus saving energy, time, water and  
detergent.  
cotton and linen : drum full not too tighty packed  
resistant synthetics : no more than 2/3 of the  
drum  
delicate fabrics and wool : no more than 1/2 of  
the drum.  
However, when the laundry is particularly dirty  
(for example if you have to wash mechanics'  
overalls or butchers' aprons), you are advised to  
use prewash with a biological detergent.  
Before placing the laundry in the  
machine:  
- mend all tears, holes and ladders;  
- secure loose buttons and close poppers and  
zips;  
- do not wash frayed garments - mend hems  
before washing;  
- remove all small objects from pockets. Nails,  
pins, clips and similar objects can seriously  
damage your washing machine and laundry;  
- remove curtain hooks;  
- wash coloured garments and in particular those  
with non-fast colours separately when washing  
for the first time. They are likely to lose colour the  
first time they are washed.  
- treat obstinate stains such as grass, rust, tar,  
paint,inketc.withastainremoverbeforewashing.  
Temperatures  
We suggest that white cotton and linen, if it is not  
excessively soiled, can be washed at 60° instead  
of 90°C. There should be no reduction in perfor-  
mance, but there will be an energy saving of  
approximately 30%.  
The same applies to a lesser extent to fast  
coloured garments.  
They usually require a temperature of 60°C but if  
they are not excessively dirty, you will have  
satisfactory results at 40°C.  
Garments with non-fast colours should not be  
washed at temperatures above 40°C. If fast and  
non-fastcoloursarewashedtogether,theyshould  
be treated as non-fast colours and therefore the  
10  
 
To remove paint stains, for example, use a vola-  
tile substance such as turpentine: in this case,  
you should wait for it to dry completely before  
washing.  
The manufacturer of your washing machine is not  
responsible for any damage deriving from the use  
of volatile, inflammable or toxic substances.  
Liquid detergents  
Using the new automatic dispenser for liquid  
detergents, it is possible to use a liquid detergent  
for main wash phases if you start the washing  
machine immediately.  
Liquid detergents can be used instead of powder  
detergents particularly for lightly soiled laundry  
and for medium or low temperature washing  
programmes, while it is better to use a powder  
detergent for high temperature washing  
programmes.  
At the end of the washing  
Damp laundry should be dried as soon as possi-  
ble after finishing the wash.  
Knitwear and woollens should be dried flat away  
from direct sunlight.  
Liquid additives  
Any liquid additives for softening the laundry  
Detergents and additives  
must be poured into the compartment  
of the  
Good washing results also depend on the choice  
of detergent and use of the correct quantities to  
avoidwasteandprotecttheenvironment.Although  
biodegradable, detergents contain substances  
which in large quantities can damage the delicate  
ecological balance of nature.  
detergent dispenser drawer before starting the  
programme.  
Theadditionofwatersoftenerisparticularlyuseful  
when drying the clothes in a tumble dryer after  
washing to avoid a static charge.  
Make sure that the level of the liquid never  
exceeds the MAX level.  
Always use good quality detergents suitable  
for use in washing machines.  
Bleach  
Follow the indications given by the detergent  
manufacturer according to the weight of laundry,  
the degree of soil and the hardness of the water  
in your area; if you do not know how hard it is, ask  
your local Water Authority.  
You may use a bleach agent in all the washing  
programmes. However, make sure that the fabric  
withstands the treatment. Bleach is automatically  
washed down into the drum. Pour 1/4 to 1 glass  
of 12° chl bleach into compartment " " before  
switching the machine on.  
Powder detergents.  
Make sure that the level of the liquid never  
exceeds the MAX level.  
The washing powder should be placed in the  
appropriate compartments of the dispenser  
drawer before starting the programme. Special  
detergentsareavailaibleforcolouredanddelicate  
fabrics and for wool.  
"Concentrated" powder detergents  
Pour the concentrated powder detergent into the  
main wash ( ) compartment.  
Avoid selecting programmes including  
prewash when concentrated detergents are  
used.  
Water hardness  
German degrees  
Level  
Characteristic  
French degrees  
°T.H.  
°dH  
m mol  
1
2
3
4
Soft  
medium  
hard  
0 -  
8 - 14  
15 - 21  
>
7
0 - 1,3  
1,4 - 2,5  
2,6 - 3,8  
0 - 15  
16 - 25  
26 - 37  
very hard  
21  
>
3,8  
>
37  
11  
 
Wash code symbols  
These symbols appear on fabric label, in order to help you choose the best way to treat your  
laundry.  
Strong wash  
Max. wash  
Max. wash  
Max. wash  
Max. wash  
temperature30°C  
temperature95°C temperature60°C temperature40°C  
WASH  
Do not  
wash  
at all  
Hand  
wash  
Delicatewash  
Do not bleach  
BLEACHING  
Bleach in cold water  
Hot iron max. 200°C  
Warm iron max. 150°C  
Lukewarm iron max. 110°C  
Do not iron  
IRONING  
Drycleaning  
in all solvents  
Dry cleaning in  
perchlorethylenepetrol,  
pure alcohol, R 111 & R 113  
Dry cleaning in petrol, pure  
alcohol, and R 113  
Do not dry clean  
DRY CLEANING  
high  
temperature  
low  
temperature  
DRYING  
Flat  
On the line  
On clothes hanger  
Tumbledry  
Do not tumble dry  
Symbols identification on the panel of your washing machine :  
: prewash detergent compartment  
: wash detergent compartment  
: soften detergent compartment  
: spinning for cotton programmes (  
: synthetics programmes  
: rinse hold  
)
: draining  
: wool symbol  
12  
 
CLEANING AND MAINTENANCE  
Make sure that the machine is unplugged and  
the water tap turned off before undertaking any kind of maintenance.  
Bodywork  
The outside or the machine can be cleaned with  
warmwaterandaneutralnon-abrasivehousehold  
detergent. Wipe with clean water and dry after  
cleaning.  
Important : do not use methylated spirit, diluents  
or similar products.  
It is advisable, from time to time, to carry out a  
complete cycle without a washing load, adding a  
decalcifying product.  
fig.1  
fig.2  
The detergent dispenser  
The detergent dispenser is very easy to remove.  
Just turn the two screws 1/4 of a turn and slide the  
box towards the top (fig.1 and fig.2).  
fig.3  
Clean the detergent dispenser under running  
water with a brush or a piece of rag (fig.3).  
Reposition the detergent dispenser into the lid  
and refix the two screws (fig.4 and fig.5).  
fig.5  
fig.4  
The drain filter  
The machine has got a mecanic filter located on  
the front part to collect lint and small objects  
(toothpins, coins, pins, etc) inadvertently left in  
the clothes. It is essential that this filter is cleaned  
regularly.  
Frequency of cleaning depends on the type of  
articleswashed(cleaningshouldbemorefrequent  
if the articles have no hem and tend to fray).  
fig.1  
Open the flapdoor covering the filter by pressing  
the left side of the filter door (fig.1).  
Place a container underneath to catch any  
spillage. According ot the models, complete the  
drain of the appliance by taking away the cap and  
by extracting the little hose located on the left of  
the filter (fig.2).  
fig.2  
Turnthefilteranticlockwiseandcleanitthoroughly  
with running water (fig.3).  
Refit the filter in the guides and turn it clockwise.  
Refit the little hose ans the cap, then close the  
flapdoor.  
fig.3  
13  
 
IF SOMETHING DOESN'T WORK ?  
Problems  
Solutions  
The wash results are not as usual  
Check that :  
was the wrong quantity or the wrong detergent  
added?Insufficientdetergentleadstogreywashes  
and scale deposits in the machine. Check the  
quantities more exactly.  
were special stains pre-treated ?  
were programme and temperature correctly  
chosen ?  
The washing cycle is very much too  
long.  
Check that :  
the water pression is sufficient.  
the pump filter is not obstructed.  
there has not been a power breakdown.  
The washing machine stops during a  
washing cycle.  
Check that :  
the water pression is sufficient.  
the pump filter is not obstructed.  
the mains fuse is intact.  
there is not a rinse hold ending a washing  
programme for delicate laundry (see the  
programmes chart page 10).  
The machine does not start up  
Check that :  
the mains fuse is intact.  
the appliance is plugged in.  
the lid is firmly shut.  
theprogrammeselectordialiscorrectlypositioned.  
thebeginningoftheprogrammehasbeenordered  
(on/off pushbutton pushed on).  
there has not been a power breakdown.  
The machine does not drain and/or does  
not spin  
Check that :  
the drain hose is not squashed or bent.  
the drain filter is not clogged.  
The machine does not fill  
Check that :  
the inlet water hose is opened and the water  
pression is sufficent.  
the lid of the appliance is closed.  
there has not been a breakwater.  
14  
 
IF SOMETHING DOESN'TWORK (continue)  
Problem  
Solutions  
The machine vibrates or is too noisy  
Check that :  
all the transit bolts and packing have been  
removed.  
all the feet resting firmly on the ground, the lock  
nuts have been secured.  
the machine does not touch something.  
the load is sufficent.  
The machine empties as it fills  
There is water on the floor  
Check that :  
the end of the drain hose is not too low.  
Check that :  
there is not too much detergent or unsuitable  
detergent. The formation of foam can cause water  
leaks.  
one of the detergent dispenser is not obstructed.  
the drain hose is well hanged.  
if one of the joints or the tap leaking ? It is not  
always easy to see as the leak often runs along the  
hose.  
is the drain filter cover properly closed ?  
Softener detergent flows out the overflow  
orifice  
Check that :  
you have respected the adviced quantities.  
15  
 
SERVICE  
If you have unable to identify or solve the problem,  
consult our servicing department. Before  
telephoning, make a note of the make, model and  
date of purchase of your machine : the service  
department will require this information.  
Data plate  
You will find these informations on the data plate  
of the appliance. It is placed on the back of the  
appliance.  
16  
 
FORTHE INSTALLER  
Technical information  
Dimensions  
height with panel  
height without panel  
width  
895 mm  
850 mm  
397 mm  
depth  
600 mm  
Power supply voltage / frequency  
Total power absorbed  
Heater rating  
230 V / 50 Hz  
2300 W (10 A)  
1950 W  
Water pressure  
minimum  
5 N/cm² (0,5 kg/cm2)  
80 N/cm² (8 kg/cm2)  
5 kg  
maximum  
cotton  
Maximum load  
synthetics  
wool  
2,5 kg  
1 kg  
Spinningspeed  
550rpm  
Electrical consumption (washing at 60°C)  
1,3 kWh  
This appliance complies with the following EC Directive :  
- 72/23/EEC of 19.02.1973 - Low-Voltage Directive  
- 89/336/EEC of 03.05.1989 (including Amentment Directive 92/31/EEC) - EMV Directive.  
Installation  
Unpacking  
The parts protecting the inner components of  
Fig. 1  
Fig. 2  
the machine during transit are red. They must  
all be removed before using your machine for  
the first time. These parts and their securing  
means should be kept in case the machine  
has to be transported again.  
Unpack the appliance. Tilt the appliance  
backwards. Give to one of the back corners a  
quarterturn.Theappliancecomesfreenaturally  
out the polystyrene basis. Take away this basis  
(fig. 1).  
Open the lid of the appliance and remove the  
polystyrene wedge which blocks the drum.  
Close the lid (fig. 2).  
B
Fig 4  
On the back part and with a spanner, remove  
the two red loosened spacers (A) (fig. 3).  
A
Fig 3  
Fig 5  
Theholeswhicharenowvisiblemustbeclosed  
with the plugs (B) provided with the appliance  
(fig. 4).  
Fig 6  
Please ensure that these parts have been  
removed from the machine and keep them in  
case of next transport (fig. 5).  
If you want to keep the alignment of your  
appliance with the adjacent cupboards, you  
have the possibility to cut the crossbar holding  
the hoses located at the back of your washing  
machine (fig. 6).  
17  
 
Installation  
The floor must be clean and dry, free from floor  
polish and other greasy substances, so that the  
machine does not slide about. Do not use any  
grease as lubrification.  
Installation on deep pile carpets and floor  
coveringswithfoambackingsisnotrecommended,  
as the stability of the machine is no longer  
guaranteed. If the installation must be done on a  
carpeted floor, the openings located at the lower  
part of the back of the appliance must remain  
free. These openings ensure a good ventilation  
of your appliance. In case of small format tiles,  
place a standard rubber mat under the machine.  
With sprung floors, in particular wooden plank  
floors with yielding floor boards, screw down a  
waterproof wooden base at least 15 mm thick,  
across at least 2 floor boards. Wherever possible,  
place the appliance in the corner of the room -  
there wooden floors are most secure and least  
liable to resonance vibrations.  
Never compensate for small unevennesses in the  
floor by placing wood, pasteboard or such like.  
The front adjustable feet must be blocked after  
installation of the appliance by means of the  
locking nuts.  
Levelling  
It is essential that your machine is absolutely  
level. Raise or lower the front feet of the machine;  
tighten the nuts of the feet with an adjustable  
wrench.  
Also make sure that the machine does not touch  
the wall, the furnitures etc. during the functioning.  
This in order to avoid vibrations, noise or displace-  
ments of the appliance during operation.  
Moving of the appliance  
To move your washing machine, put it on its  
wheels by turning from the right to the left the  
special lever situated at the bottom of the ma-  
chine. Once the machine placed at the chosen  
place, bring back the lever to its initial original  
position.  
18  
 
Water connection  
Connect the water inlet hose to a cold water tap  
with a 3/4" gas threaded orifice, after having  
inserted the rugger sealing washer into the hose  
collar. If the water connection is made onto new  
pipes or onto pipes which have not been used for  
a long time, it is advisable to run off a certain  
amount of water before connecting the machine.  
Place the curved end of the outled hose into a  
drain pipe having a height between 70 and 100  
cm from floor level or secure it to a sink or bath tub.  
Make sure that the drain hose is firmly secured so  
that it will not slip out or fall down from its position.  
The water should drain freely and, consequently,  
the drain hose should not be choked or placed in  
such a way as to obstruct the normal water flow.  
If an extension hose is required, remember that it  
might cause a malfunction in the drain pump,  
particularly if the extension has a length in excess  
of 1 meter or if the diameter of the extension is  
smaller than the diameter of the original drain  
hose.  
Electrical connection  
Before you fit the plug into the wall socket, check  
the following points :  
1) The supply voltage of the domestic wiring  
system does not fluctuate by more that 10%, plus  
or minus, from 230 V.  
2) The meter, the fuses, the supply line and the  
wall socket are suitable to carry the maximum  
load required by the machine (2,3 kW).  
Very important :  
The washing machine is provided with a  
feeding wire with earth connection: it must be  
connected to a plug like that is provided with  
a good earth connection.  
The replacing of the power cord must only be  
realized by the After Sales Service.  
The manufacturer declines any responsibility  
where the previous recommendations are not  
followed.  
19  
 
129 6774 05  
 

Weider Home Gym WESY77731 User Manual
Weslo Treadmill WLTL01530 User Manual
West Bend Speaker 54129 User Manual
Whirlpool Clothes Dryer 8527795 User Manual
Whirlpool Freezer EV20VS User Manual
Whirlpool Ice Maker CHE 12RC User Manual
Whirlpool Microwave Oven 8204864 3828W5U0311 User Manual
White Rodgers Thermostat 1F87 51 User Manual
Zanussi Cooktop 200228 User Manual
Zanussi Refrigerator ZBB 7266 User Manual